Epson WorkForce Pro WF-C5790 User Manual

327
Transporting Your Product
If you need to store your product or transport it a long distance, prepare it for transportation as described
here.
Caution: During transportation and storage, follow these guidelines:
• Because the product is heavy, two or more people should lift and carry it using the hand positions
shown here:
• Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
• Leave the ink packs installed. Removing the packs can dry out the print head and may prevent the
product from printing.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help
prevent the print head from drying out. Store your product in a cool, dry place.
1. Turn off the product.
2. Wait for the power light to turn off, then unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper from the product and make sure there are no originals on the scanner glass.
5. Lift up the scanner unit.
6. Make sure the print head is in the home position on the right.

Epson WorkForce Pro WF-C5790 Specifications

General

Print Resolution	4800 x 1200 dpi
Automatic Duplex Printing	Yes
Output Paper Capacity	150 sheets
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scan Resolution	1200 x 2400 dpi
ADF Capacity	50 sheets
Fax Speed	33.6 Kbps
Display	4.3" color touchscreen
Print Technology	PrecisionCore
Print Speed	24 ppm (black/color)
Input Paper Capacity	250 sheets
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Scanner Type	Color flatbed and ADF
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal, Executive
Ink Cartridges	Black, Cyan, Magenta, Yellow