Epson XP-4200 Series User Manual

An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals” on page 29
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Menu Options for Copying” on page 53
Scanned Image Problems
Uneven Colors, Dirt, Spots, and so on Appear in the Scanned Image
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 73
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
& “Placing Originals” on page 29
Solving Problems > Printing, Copying, and Scanning Quality is Poor > Scanned Image Problems
129

Epson XP-4200 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Display	2.4" Color LCD
Printer Type	All-in-One
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Handling Input	100 sheets
Scan Resolution	1200 x 2400 dpi
Operating Systems	Windows, macOS
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Connectivity	USB, Wi-Fi
Supported Media Sizes	4 x 6 in, 5 x 7 in, 8 x 10 in, Letter, Legal
Scanner Type	Flatbed
Mobile Printing	Apple AirPrint, Mopria
Ink Type	Dye-based ink
Ink Cartridges	4 (Black, Cyan, Magenta, Yellow)