Epson XP-4200 Series - Loading Pre-Punched Paper; Loading Long Papers

& “Unavailable Paper Types” on page 153
Loading Pre-punched Paper
Load paper at the center of the rear paper feeder with the printable side facing up.
❏ Load a single sheet of dened size plain paper with binding holes at the le or right.
❏ Adjust the print position of your
le
to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
Related Information
& “Available Paper and Capacities” on page 151
& “Unavailable Paper Types” on page 153
Loading Long Papers
When loading paper longer than legal size, store the paper support, and then atten the leading edge of the paper.
Select User-Dened as the paper size setting.
❏ Make sure the end of the paper is cut perpendicularly. A diagonal cut may cause paper feed problems.
❏ Long paper cannot be held in the output tray. Prepare a box and so on to make sure that paper does not fall on
the oor.
❏ Do not touch paper that is being fed or ejected. It could injure your hand or cause print quality to decline.
Related Information
& “Available Paper and Capacities” on page 151
& “Unavailable Paper Types” on page 153
Loading Paper > Loading Various Paper > Loading Long Papers
27