Epson XP-432 Series - Cannot Start Scanning when Using the Control Panel; Scanned Image Problems

Cannot Start Scanning when Using the Control Panel
❏ Make sure EPSON Scan and Epson Event Manager are installed correctly.
❏ Check the scanning setting assigned in Epson Event Manager.
Related Information
& “Cannot Start Scanning” on page 115
& “Epson Event Manager” on page 98
Scanned Image Problems
Scan Quality Is Poor
❏ Clean the scanner glass.
❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner
glass. Uneven colors, smears, or dots may appear when the original or the document cover is pressed too hard.
❏ Remove dust from the original.
❏ Make the appropriate document type settings.
❏ Scan at a higher resolution.
❏ Adjust the image in EPSON Scan, and then scan. See the EPSON Scan help for details.
Related Information
& “Cleaning the Scanner Glass” on page 83
& “Menu Options for Scanning” on page 60
Characters Are Blurred
❏ In Home Mode or Oce Mode in EPSON Scan, select Image Option as the Image Adjustments setting, and
then select Text Enhancement.
❏ In Professional Mode in EPSON Scan, select Document as the Auto Exposure Type in the Original settings.
❏ Adjust the threshold settings in EPSON Scan.
❏ Home Mode
Select Black & White as the Image Type setting, click Brightness, and then adjust the threshold.
❏
Oce
Mode
Select Black & White as the Image Type setting, and then adjust the threshold.
❏ Professional Mode
Select Black & White as the Image Type setting, and then adjust the threshold setting.
❏ Scan at a higher resolution.
User's Guide
Solving Problems
116