Copying
Copying Basics
1. Load paper in the printer.
c
Important:
Make the paper settings on the control panel.
2. Place the originals.
3. Enter Copy from the home screen using the
l
or
r
button, and then press the OK button.
4. Set the number of copies using the – or + button.
5. Select color copy or monochrome copy using the
l
or
r
button.
6.
Select Print Settings using the
d
button, and then press the OK button. Check the settings such as the paper
size and the paper type and change settings if necessary. Select the setting items using the
u
or
d
button and
change settings using the
l
or
r
button.
Note:
If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as the
Reduce/Enlarge setting and press the OK button. en specify a percentage using the – or + button. You can change the
percentage in increments of 10% by holding down the – or + button.
7. Press the
x
button.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 19
& “Placing Originals on the Scanner Glass” on page 23
& “Menu Options for Copy” on page 54
Menu Options for Copy
Note:
Available menus vary depending on the layout you selected.
The number of copies
Enter the number of copies.
Color
Copies the original in color.
B&W
User's Guide
Copying
54
To Next Page
Loading...
Need help?
General
