Epson XP-432 Series - Placing Originals on the Scanner Glass

Placing Originals on the Scanner Glass
c
Important:
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
1. Open the document cover.
2. Remove any dust or stains on the scanner glass.
3. Place the original face-down and slide it to the corner mark.
Note:
e area 1.5 mm from the edges of the scanner glass is not scanned.
❏ To copy a photo, place it 5 mm away from the corner of the scanner glass.
You can place up to two photos at the same time (depending on the size of originals). Leave 5 mm between
photos.
User's Guide
Placing Originals on the Scanner Glass
23