6. Slide the right edge guide to the edge of the paper.
7. Insert paper cassette 1. Line up the alignment marks on the printer and the tray.
8. Check the current paper size and paper type settings displayed on the control panel. To use the settings, touch
Done. To change the settings, select Paper Size or Paper Type, and then go to the next step.
Note:
If you have disabled the Paper
Conguration
setting, the paper setting screen is not displayed.
9.
Select the paper size and type on each setting screen. Touch Done on the paper settings conrmation screen.
Note:
❏ You can also display the paper size and paper type settings screen by selecting Setup > Printer Setup > Paper
Source Setting > Paper Setup.
❏ e output tray slides out automatically when printing starts. To eject the tray before printing starts, press the
button.
Related Information
& “Paper Handling Precautions” on page 38
& “Available Paper and Capacities” on page 39
User's Guide
Loading Paper
44
To Next Page
Loading...
