1. Load paper in the printer.
c
Important:
❏ When loading in the paper cassette, make the paper settings on the control panel.
❏ When loading in the rear paper feed slot, start printing from the printer driver before loading paper. Select
Rear Paper Feed Slot as the Paper Source setting on the printer driver. When printing starts, the printer
driver tells you that printing is in progress. Follow the printer's on-screen instructions to load paper.
2. Open the le you want to print.
3. Select Print or Print Setup from the File menu.
4.
Select your printer.
5. Select Preferences or Properties to access the printer driver window.
6. Make the following settings.
❏ Paper Source: Select the paper source in which you loaded the paper.
If the printer has only one paper source, this item is not displayed.
❏ Document Size: Select the paper size you loaded in the printer.
❏ Borderless: Select to print with no margins around the image.
In borderless printing, the print data is enlarged slightly more than the paper size so that no margins are
printed around the edges of the paper. Click Settings to select the amount of enlargement.
User's Guide
Printing
72
To Next Page
Loading...
