Erbauer ERB238MSW - Specific Safety Rules and Symbols

ERBAUER 254MM (10”) SINGLE BEVEL SLIDING MITRE SAW
- The laser shall be used and maintained in accordance with the manufacturer’s
instructions.

- The laser beam shall not be deliberately aimed at personnel and shall be prevented




direct the beam back at the operator.
- Do not change the laser light assembly with a different type. Repairs must be
carried out by the laser manufacturer or an authorised agent.
SPECIFIC SAFETY RULES & SYMBOLS
WARNING!
Do not operate machine if warning and / or instruction labels are missing or damaged.
Symbol Description
V Volts
A Amperes
Hz Hertz
Min
-1
Speed
~ Alternating Current
no No Load Speed
Double Insulated
Wear Safety Goggles
Wear Ear Protection
Wear Dust Mask
Read Instruction Manual
Laser Warning Symbol
Conforms to relevant
safety standards
General Warning