EasyManua.ls Logo

ErgoPack 726E - Safety Regulations for Battery Pack and Charger

Default Icon
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Intended use
This strapping system is designed for strapping pallets/ loading carriers. The
strapping system has been developed and constructed for safe operation
when strapping.
The system is only to be used for strapping with plastic straps
(polypropylene and polyester). Strapping with a steel strap is not possible
with this strapping system.
The system is not designed to strap aliments which are not packaged.
The set up tension force must correspond to the packaged goods to be
strapped. The construction of the strapping system does not consider any
risk to damage goods, because of the strapping itself and/ or improper set
tension force.
3.1 Safety regulations for battery pack and
charger
Check the plug and the cable before each use and have them replaced
by a specialist if they are damaged
Do not use any batteries from other manufacturers, use original spare
parts only.
Keep the connection plug to the battery pack away from non-related
objects and dirt.
Protect the charger from moisture; operate it in dry rooms only.
Do not open the battery and protect it from shock, heat and fire.
Danger of explosion!
Store batteries in a dry frost-proof place. The ambient temperature
must not exceed 50°C and must not fall below -5°C.
Damaged batteries may not be reused.
- 15 -

Related product manuals