Clean the ChainLance with acetone or petroleum if it has become dirty with
oil.
Do not place the ChainLance into cleaner.
Never use lubricants like grease or oil!
Your ErgoPack is made out of galvanized steel, powder coated steel,
stainless steel and highly wear resistant plastics and is basically
maintenance free.
Clean the outside of the ErgoPack with a damp cloth if it is extremely
dirty.
7. Servicing and repair
7.1 Cleaning the ChainLance
- 55 -
Warning!
During all maintenance and service/repair works, the strapping
system has to be switched off be pressing the “OFF” switch, the
key has to be removed from the main switch and the main
power cable must be unplugged from the battery pack.
To Next Page
Loading...
