Chapter 3
DIR |POWER-UP CARRIER
4.2.10 |NO STORED SERVICE
The second line displays the service name of the stored service.
3.5.7.2.11 4.2.11 Emergency Home Carrier
To view the current condition of this option, press the T (Down) key. The following
screen is displayed:
DIR |EMERGENCY HOME CARRIER
4.2.11 |NO STORED SERVICE
The second line displays the service name of the stored service.
This is the last option of the Director Menu. To return to the CA Menu and access
further screens, press the W (Back) key twice.
3.5.8 5 Output
The Output menu allows access to and selection of the various equipment outputs.
To view the Output menu, press the T (Down) key. The following screen is
displayed:
OUTPUT |OUTPUT
5 | >
3.5.8.1 5.1 Output Selection
To view the Output Selection menu, press the X (Forward) key. The following
screen is displayed:
OUTPUT |OUTPUT SELECTION
5.1 | >
3.5.8.1.1 5.1.1 Outputs 1 and 2
To edit the output types for outputs 1 and 2, press the X (Forward) key. The
following screen is displayed and the Edit key is lit:
OUTPUT |OUTPUT ONE : SD-SDI
5.1.1 |OUTPUT TWO : HD-HDI
To edit the output 1 and 2 types:
1. Press the Edit key. The cursor appears at the start of the current option.
2. Using the S (Up) and T (Down) keys toggle between the available options: ASI,
SD-SDI, AUTO and HD-SDI (dependent on model and option licences obtained).
EN/LZT 790 0005 R1A
3-56
To Next Page
Loading...
