Ericsson RX8000 Series - 2 Installing the Equipment

2 Installing the Equipment
Chapter 2
Contents
2.1 Read This First! ....................................................................................2-3
2.1.1 Handling ...............................................................................................2-3
2.1.2 Installing the Equipment .......................................................................2-3
2.1.3 Lifting .................................................................................................... 2-3
2.1.4 Site Requirements ................................................................................2-3
2.1.4.1 Power Supplies..................................................................................... 2-3
2.1.4.2 Environment .........................................................................................2-3
2.1.4.3 Lightning Protection..............................................................................2-3
2.2 Preliminary Checks............................................................................... 2-4
2.2.1 Mechanical Inspection .......................................................................... 2-4
2.2.2 Moving the Equipment Safely............................................................... 2-4
2.3 Installing the Equipment .......................................................................2-4
2.3.1 Fixing .................................................................................................... 2-4
2.3.2 Ventilation.............................................................................................2-5
2.3.2.1 Openings in the Covers ........................................................................2-5
2.3.2.2 Care in Positioning ...............................................................................2-5
2.3.2.3 Protection from Moisture ......................................................................2-5
2.3.3 Installing Cables - Safety......................................................................2-6
2.4 EMC Compliance Statements ..............................................................2-6
2.4.1 EN 55022/AS/NZS 3548....................................................................... 2-6
2.4.2 FCC ......................................................................................................2-6
2.5 AC Supply Operating Voltage and Fusing – Safety Information........... 2-6
2.5.1 AC Power Supply .................................................................................2-6
2.5.2 AC Power Supply Cord......................................................................... 2-7
2.5.2.1 General.................................................................................................2-7
2.5.2.2 Wire Colors...........................................................................................2-7
2.5.3 Connecting the Equipment to the AC Power Supply ............................2-8
2.6 Protective Earth/Technical Earth ..........................................................2-8
2.7 Signal Connections............................................................................... 2-9
2.7.1 General.................................................................................................2-9
2.7.2 RF IN Connector (RX8200 and RX8320 only)....................................2-10
2.7.3 ASI OUT Connector (RX8310/15/20 only)..........................................2-11
2.7.4 ASI/SDI OUT Connector (RX8200 and RX8330 only)........................ 2-12
2.7.5 ASI/HD-SDI/SD-SDI OUT Connector (RX8200 only) ......................... 2-12
2.7.6 CVBS Connector ................................................................................2-12
2.7.7 AUDIO/AUDIO OUT Connector..........................................................2-13
2.7.8 ETHERNET/CONTROL Connector .................................................... 2-13
EN/LZT 790 0005 R1A
2-1