Need help?Do you have a question about the Ericsson RX8000 and is the answer not in the manual?
General| Model | RX8000 |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Supported Standards | DVB-S/S2, DVB-T/T2, DVB-C |
| Video Formats Supported | MPEG-2, MPEG-4 |
| Audio Formats Supported | MPEG-1 Layer II, AAC |
| Input Ports | ASI |
| Output Ports | ASI |
| Input Frequency Range | 950 MHz - 2150 MHz (Satellite) |
| Demodulation | QPSK |
| Operating Temperature | 0°C to +40°C |
Overview of the Reference Guide, its users, and the equipment covered.
Details RX8000 features, controls, and indicators.
Describes physical construction and rack mounting.
Explains front panel user interface elements.
Details rear panel connections and specifications.
Explains how to identify serial numbers and hardware IDs.
Crucial initial instructions and safety information for installation.
Covers fixing, rack mounting, and ventilation requirements.
Details rear panel signal connections and their specifications.
Explains the front panel user interface, menus, and controls.
Covers accessing and using the web browser interface (Dashboard and Advanced views).
Details how to view and edit various inputs to the IRD.
Explains CA status, common interface, BISS, Director, RAS, and NDS CA.
Details how to control all video aspects via the Decode web tab.
Explains audio configuration accessed from the Decode web tab.
Lists various output types supported by RX8000 hardware options.
Covers MPEG-2 to MPEG-4 AVC transcoding functionality.
Details the installation of the RX8000 Unit Upgrade Utility.
Provides schedules and instructions for routine inspection and basic fault-finding.
Covers routing inspection, cooling fans, cleaning, and servicing.
Details Ericsson support, warranty, and service level agreements.
Offers general information and preliminary investigations for isolating faulty equipment.
Covers video and audio decoding/output, connectors, and general specs.
Details input specifications for DVB-S2, DVB-T2, 8-VSB, ASI, G.703, and IP interfaces.
Details video and audio output specifications, including ASI, SDI, and VGA.
Covers operational and storage/transportation environmental conditions.
Lists fixed Alarm Identifiers used in Compatibility Mode.
Categorizes alarm identifiers: Generic, Decode, CA, Network, Environment, etc.
Lists common alarm identifiers like TS Lock and Input Lock status.
Lists alarms related to video and audio decoder status.
Lists alarms related to Conditional Access (CA) errors.
Lists alarms related to environmental conditions like temperature and fan status.
Lists alarms specific to the 4:2:2 Decoder card.
Lists alarms specific to the DVB-S2X input card.
To Next Page