Ericsson RX8000 - Peak to Average Power Indicator; Pilot Pattern; SISO; MISO S1 Signaling

Using the Equipment
3-130
EN/LZT 790 0005 R7A
3.10.7.11.28 Pilot Pattern
This menu shows the current pattern of pilot carrier used for the T2 transmission.
STATUS |PILOT PATTERN
3.2.1.2.5 |PP1
This can have the values:
• PP1
• PP2
• PP3
• PP4
• PP5
• PP6
• PP7
• PP8
3.10.7.11.29 Peak to Average Power Indicator
This menu shows the current peak to average power indicator.
STATUS |PAPR Indicator
3.2.1.2.6 |NONE
This can have the values:
• None
• ACE USED
• TA USED
3.10.7.11.30 SISO / MISO S1 Signaling
This menu shows the scheme used for S1 signaling within the T2 transmission.
STATUS |SISO / MISO
3.2.1.2.7 |NONE
This can have the values:
• SISO
• MISO