Using the Equipment
Figure 3.99 RX8200 4K Configuration
The Transport Stream containing the 4 Service MPTS is input into the Master IRD,
this can be via ASI, IP, or Satellite. The Transport Stream is then supplied to the
Slave IRDs by daisy-chaining the ASI Output from one IRD to the ASI Input of the
next IRD. The delay introduced by each ‘hop’ in the ASI daisy chain is negligible and
has no effect on the synchronization between the IRDs.
3.13.3.6.1 Master IRD
On the Decode > Advanced settings, the Master IRD is configured with Frame-
Sync DISABLED. Enabling frame-sync will force the behaviour of the IRD to act as
a Slave IRD.
The 422 VSync Lock option must be DISABLED.
The Simul-Sync 3D license must be enabled. Confirm this by ensuring that the
status field Encoder Delay Compensation is displayed.
The Rx Delay Mode option can be set to the desired level.
To Next Page
Loading...