Ericsson RX8000 - DVB-S2 Gold Codes

Using the Equipment
EN/LZT 790 0005 R7A
3-183
Note: Ericsson Customer Support must be contacted to supply the required
customization key. Customer Support will require details of the system for
which the key is required.
When the key has been entered the unit can be set into Signal Protection mode
from the CA menu by selecting Enable from the TTV Signal Protection item on the
CA tab.
Figure 3.88 TTV Signal Protection Field
When the unit is in this mode, all Transport Streams entering the unit will have the
Signal Protection key applied to them. This means only Transport Stream encrypted
with this key will be usable by the unit. All other streams will be modified by this key
and therefore cannot be correctly processed by the RX8000.
3.11.9.6 Front Panel Setup
This control sets the unit into Signal Protection mode. In this mode all transport
streams entering the unit will have the Signal Protection key applied to them. This
means only Transport Stream encrypted with this key will be usable by the unit. All
other streams will not be correctly passed through or decoded by the unit
CA |SIGNAL PROTECTION
5.6 |DISABLE
3.11.10 DVB-S2 Gold Codes
3.11.10.1 Availability
 = Option B = Supplied with Base Model
RX8200 RX8252 RX8305 RX8310 RX8310B RX8315 RX8320 RX8330 RX8330C
 
B B B B B
3.11.10.2 Order Items
Option Name Card Number FAZ Number Marketing Code
This item is only available on units fitted with S2 card RX8200/DVBS2/2 fitted into RX83XX from January
2012.