Using the Equipment
3.9.6.1 Save Configuration to File
Figure 3.33 Save Configuration
This section enables the user to save the current IRD configuration as an XML file.
This may then be used as a back-up to preserve all the settings of the IRD so that it
can be used to restore a configuration in the event that the settings have been
changed or lost. This feature also enables you to quickly set up multiple devices with
the same settings, if required.
The option Right Click to Save should always be used.
The option Right Click to Save (with parameter names) is for development
purposes only.
3.9.6.2 Restore Configuration from File
Figure 3.34 Restore Configuration
This allows the user to upload an XML configuration file of an IRD. This will normally
be a configuration file that has previously been saved using the Save Configuration
to File option from the same or similar device. This provides a quick and simple
method of restoring a unit to operation, provided that up-to-date back-ups are
maintained.
The configuration will take effect immediately once the upload is complete and
provided that it is valid. In the event of an invalid file being uploaded, none of the
device settings will be changed.
To Next Page
Loading...