Ericsson RX8000 - ETHERNET;CONTROL Connector

Installing the Equipment
EN/LZT 790 0005 R7A
2-9
Item Specification
Pin 5 – Ground
Pin 6 – Digital audio –
Pin 7 – Ground
Pin 8 – Left –
Pin 9 – Right –
Nominal output
impedance
50 Ω
Maximum data rate 3.072 Mbps
Analogue Output level +20 dBm nominal clipping level.
Selectable in range 12 to +24 dBm.
Load impedance
≥600 Ω balanced
2.3.11 ETHERNET/CONTROL Connector
All units provide two Ethernet remote control interfaces
for Web Browser Control.
Table 2.10 ETHERNET/CONTROL Connectors
Item Specification
Connector type RJ-45 (100BaseT)
Connector designation ETHERNET 1 or CONTROL 1
ETHERNET 2 or CONTROL 2
Pin-outs
(Unused pins not
connected)
Pin 1 – Tx Out (+)
Pin 2 – Tx Out (-)
Pin 3 – Rx In (+)
Pin 6 – Rx In (-)
ETHERNET/CONTROL