EasyManua.ls Logo

Ericsson RX8000 - Current Line Mode 1;RX up Time 1; Default Gateway 1; Ethernet Line Mode 1; MAC Address 1

Ericsson RX8000
500 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the Equipment
3-92
EN/LZT 790 0005 R7A
3.10.5.13.18 Default Gateway 1
This menu enables the viewing and editing of the default gateway address for
Network 1, if used. To access this menu from the above menu, press the (Down)
key.
NETWORK 1 |DEFAULT GATEWAY 1
3.2.2.2 |192.168.000.001
Use the (Up), (Down), (Forward) and (Back) keys to enter the address.
3.10.5.13.19 MAC Address 1
This menu displays the MAC address for Network 1. To access this menu from the
above menu, press the (Down) key.
NETWORK 1 |MAC ADDRESS 1
3.2.2.3 |00:20:AA:4f:06:1b
3.10.5.13.20 Ethernet Line Mode 1
This menu enables the viewing and editing of the Ethernet line mode for Network 1.
To access this menu from the above menu, press the (Down) key.
NETWORK 1 |ETHERNET LINE MODE 1
3.2.2.4 |AUTO
Use the (Up) and (Down) keys to toggle between the available options: AUTO,
10MBPS, 100MBPS or 1GBPS.
3.10.5.13.21 Current Line Mode 1
This menu displays the status of the current line mode and duplex detected for
Network 1. To access this menu from the above menu, press the (Down) key.
NETWORK 1 |CURRENT LINE MODE 1 Link Down
3.2.2.5 |DUPLEX 1 Link Down
3.10.5.13.22 RX Up Time 1
This menu displays the status of the port up time for Network 1. To access this
menu from the above menu, press the (Down) key.
NETWORK 1 |RX UP TIME 1
3.2.2.6 |12668.54 sec

Table of Contents