Ericsson RX8000 - Cancel Scan; Scan Channels; Start Searching with Bandwidth Type; Start Searching with Modulation Type

Using the Equipment
3-132
EN/LZT 790 0005 R7A
3.10.7.11.35 Scan Channels
This menu allows the user to start the process of scanning channels for content.
STATUS |SCAN CHANNELS
3.2.1.1 |NO
Use the  (Up)  (Down) keys to select YES. After confirming this, the tuner will
scan all channels.
3.10.7.11.36 Cancel Scan
This menu allows the user to abort scanning channels.
STATUS |CANCEL
3.2.1.1 |NO
Use the  (Up)  (Down) keys to select YES. After confirming this, the tuner will
stop scanning all channels.
3.10.7.11.37 Start Searching with Modulation Type
This menu allows the user to select the tuner to start scanning with a particular
modulation type.
STATUS |START SEARCHING WITH MODULATION
3.2.1.1 |DVB-T
Use the  (Up)  (Down) keys to select the modulation type from the following:
• DVB-T
• DVB-T2
• DVB-C
3.10.7.11.38 Start Searching with Bandwidth Type
This menu allows the user to select the tuner to start scanning with a particular
bandwidth type.
STATUS |START SEARCHING WITH BANDWIDTH
3.2.1.1 |6MHZ
Use the  (Up)  (Down) keys to select the modulation type from the following:
• 6 MHZ
• 7 MHZ