Using the Equipment
Note: The CA System ID of each of the services must be the BISS CA System ID
0x2600.
3.11.3.8 Front Panel
3.11.3.8.1 BISS Mode
This menu displays and allows the editing of the current BISS mode for the unit.
These are the same modes as described in the functional description.
BISS |BISS MODE
5.3.1 |MODE E FIXED
3.11.3.8.2 BISS Key
This menu displays and allows the editing of the units BISS Key, i.e. the CSW. In
modes other than BISS Mode 1 this will be the ESW as explained in the functional
description.
BISS |BISS KEY
5.3.2 |************
3.11.3.8.3 BISS User One Key
This menu displays and allows the editing of the units BISS User 1 Key. This is the
key that is used to decrypt the CW when in the BISS Mode is set to Mode E User 1
as explained more fully in the functional description.
BISS |BISS USER ONE KEY
5.3.3 |**************
3.11.3.8.4 BISS User Two Key
This menu displays and allows the editing of the units BISS User 2 Key. This is the
key that is used to decrypt the CW when in the BISS Mode is set to Mode E User 2
as explained more fully in the functional description.
BISS |BISS USER TWO KEY
5.3.4 |**************
3.11.4 Director
3.11.4.1 Availability
= Option B = Supplied with Base Model
To Next Page
Loading...