Ericsson RX8000 - Current Buffer Level; FIFO Overflow Count;MDI Delay Factor;MDI Media Loss Rate; IP Jitter; TS Packets Per UDP Frame

Using the Equipment
3-90
EN/LZT 790 0005 R7A
3.10.5.13.8 Current Buffer Level
This menu displays the current buffer level (in ms) for the last input received on the
Input Card. To access this menu from the above menu, press the  (Down) key.
STATUS |CURRENT BUFFER LEVEL
3.2.1.7 |0 ms
3.10.5.13.9 IP Jitter
This menu displays the IP jitter for the last input received on the Input Card. To
access this menu from the above menu, press the  (Down) key.
STATUS |IP JITTER
3.2.1.8 |0000000010
3.10.5.13.10 TS Packets per UDP Frame
This menu displays the Transport Stream (TS) packets per UDP frame for the last
input received on the Input Card. To access this menu from the above menu, press
the  (Down) key.
STATUS |TS PACKETS PER UDP FRAME
3.2.1.9 |0000000007
3.10.5.13.11 FIFO Overflow Count
This menu displays the FIFO overflow count for the last input received on the Input
Card. To access this menu from the above menu, press the  (Down) key.
STATUS |FIFO OVERFLOW COUNT
3.2.1.10 |0000000010
3.10.5.13.12 MDI Delay Factor
This menu displays the MDI delay factor for the last input received on the Input
Card. To access this menu from the above menu, press the  (Down) key.
STATUS |MDI DELAY FACTOR
3.2.1.11 |00.000
3.10.5.13.13 MDI Media Loss Rate
This menu displays the MDI media loss rate for the last input received on the Input
Card. To access this menu from the above menu, press the  (Down) key.