Using the Equipment
The third column labeled End Date contains end date of the authorization.
The forth column labeled - contains an entitlement vector indicating which of the
services in the collection that the card is entitled to access.
3.11.8.5.4.4 Maturity Rating
This option allows the user to configure the Maturity Level of the smart card in use.
Figure 3.84 Conax ‘Maturity Rating’ Dialog Box
The following fields are available on this dialog box:
• Card Level – States what the maturity rating of the smart card in use is at. This
is determined when the smart card is inserted.
• Select New Level – Option is used to define what the new card level should be
set to when the user applies the changes.
• Enter CA PIN to Modify – Field is used to enter the correct CA PIN required for
confirming that the card level will be changed. This is a four digit code.
In order to change the Maturity Rating of the smart card in use, the user must select
the desired maturity level using the Select New Level option and enter the correct
CA PIN in the Enter CA PIN to Modify option before clicking on Apply Changes.
The web browser will report whether the change was successful or not.
3.11.8.5.4.5 Change CA PIN
This option allows the user to change CA PIN of the smart card in use.
Figure 3.85 Conax ‘Change CA PIN’ Dialog Box
The following fields are available on this dialog box:
• Old CA PIN – Used to enter the current CA PIN for the smart card in use. This is
a four digit code.
To Next Page
Loading...