Using the Equipment
CONAX |CHIP ID
5.2.2.3 |105 1344 4454
3.11.8.6.5 Card Number
The Card Number states the card number returned from the smart card in use. This
is returned from the smart card when it is inserted.
CONAX |CARD NUMBER
5.2.2.4 |029 0000 1000 - 9
3.11.8.6.6 Number of Sessions
The Number of Sessions states the maximum number of sessions supported by the
smart card in use. It should be noted that RX8330C will only make use of only one
session at any one time. Multiservice descrambling is not supported. This is
returned from the smart card when it is inserted.
CONAX |NUBER OF SESSIONS
5.2.2.5 |005
3.11.8.6.7 Country Indicator
The Country Indicator states the country code which the smart card in use is
configured for. This is returned from the smart card when it is inserted
CONAX |COUNTRY INDICATOR
5.2.2.6 |44
3.11.8.6.8 CA Sys ID
The CA_SYS_ID states the CA system ID returned from the smart card in use. This
is returned from the smart card after processing the CAT
CONAX |CA_SYS_ID
5.2.2.7 |0X0B00
3.11.9 Signal Protection
3.11.9.1 Availability
= Option B = Supplied with Base Model
To Next Page
Loading...
