Ericsson RX8000 - Save Event Logs File; Save Quality Logs File; Store New Software Application File

Using the Equipment
3-58
EN/LZT 790 0005 R7A
3.9.6.6 Save Event Logs File
Figure 3.38 Extracting the Event Log File
This enables the user to save the current Event Logs file. Left-click on the link to
display the log in the web page (click the browser refresh button to return to the Web
Browser Interface). Right-click on the link and select the Save target as… option in
the displayed dialog to save as a file.
Note: Event logs are for use by Ericsson service personnel; as such, they are not
enabled by default. To enable these logs please contact Ericsson Customer
Support.
3.9.6.7 Save Quality Logs File
Figure 3.39 Extracting the Quality Log File
This enables the user to save the current Quality Logs file. Left-click on the link to
display the log in the web page (click the browser refresh button to return to the Web
Browser Interface). Right-click on the link and select the Save target as… option in
the displayed dialog to save as a file.
3.9.6.8 Store New Software Application File
Figure 3.40 Upgrading the IRD Software via the Web Interface