Ericsson RX8000 - Audio Outputs; Frame Sync Connector; Output Specifications; Video Outputs

Technical Specification
EN/LZT 790 0005 R7A
B-27
Input Specification
Input MER level 6 – 36 dB
Frequency range UHF 470 – 862 MHz
VHF 174 – 230 MHz
Channel bandwidth 6, 7 and 8 MHz
B.2.8 Frame Sync Connector
The receiver can frame lock to an external video source. The frame information is
input as a composite synchronous signal, with or without active video. The user can
offset the sync to the video output by ±32,000 HD pixels, with a resolution of one
pixel.
It is possible to connect multiple receivers to the same reference signal. This input
requires an external 75 Ω termination.
Table B.30 Frame Sync Connector
Item Specification
Safety status SELV
Connector type BNC, female
Connector designation Frame Sync
Pin: Centre Analogue black and burst input
Shield Ground/chassis
B.3 Output Specifications
B.3.1 Video Outputs
See:
Table B.3 625 Line
Table B.4 525 Line in 0 * Preliminary figures
, subject to characterization.
Composite Video Output,
Table B.5 HD Analogue Output Specification in B.1.1.5 Analogue HD Video Output
Table B.8 Digital Video Output Connectors in B.1.1.6 SD SDI Digital Video
B.3.2 Audio Outputs
See:
Table B.10 Analogue Audio Performance Specifications in B.1.2.7 Analogue Audio.