Ericsson RX8000 - Figure 1.7 Front Panel Controls (RX8200); Table 1.14 Front Panel Controls

Introduction
EN/LZT 790 0005 R7A
1-17
Figure 1.7 Front Panel Controls (RX8200)
Table 1.14 Front Panel Controls
Item Color Description
CA Slot - Conditional Access Slot. Located on front panel of
RX8200 and rear panel of RX8310, RX8315 and
RX8330.
USB Connector - This connector is for factory / service use only.
Status LED Red
CRITICAL Error. Indicates that a primary
interface has lost lock with the Transport Stream.
Amber
MAJOR or MINOR Error. Indicates that the unit is
locked to a Transport Stream but an error has
been detected signifying incorrect conditions or
system functioning.
Green
NO Errors. Indicates that the unit is locked to a
Transport Stream and correct conditions and
system functioning are detected.
LCD - 2-line x 40-character back-lit dot-matrix Liquid
Crystal Display (LCD).
Edit - This pushbutton enables you to edit the
parameters on the selected LCD menu. Press
again to exit without saving any changes. Integral
LED lit when functional.
Save - This pushbutton enables you to save any modified
parameters on the selected LCD menu. Integral
LED lit when functional.
 Up
 Down
 Left (Back)
 Right (Forward)
- Navigation pushbuttons for selecting relevant LCD
menu or for incrementing / decrementing selected
parameter values. Integral LED lit when
functional.
RIGHT DOWN SAVE
USB Connector
(Servicing Only)
Status LED
CA Slot
LCD
UP
LEFT
EDIT