Ericsson RX8000 - Configuring Services - Details

Using the Equipment
3-376
EN/LZT 790 0005 R7A
Figure 3.181 Good Audio Transcode Status
3.20.1.8.1 Configuring Services > Details
The transcode parameters are set up using the details box.
Figure 3.182 Service Level Details
• Input – Displays the details of the service received on the input Transport
Stream (Name, Service ID, PMT Pid and PCR Pid).
• Output – Displays the details of the service to be output on the transcoded
Transport Stream (Name, Service ID, PMT Pid and PCR Pid). All but the PCR
Pid are editable.
• Video – Displays the details of the video component of the selected service on
the received input and to be output on the transcoded Transport Stream (Video
Pid, Encoded Bit rate).
• Audio – Displays the details of the audio component of the selected service on
the received input and to be output on the transcoded Transport Stream (Pid,
Type and Language).
• Data Services – Displays the details of the data component of the selected
service on the received input and to be output on the transcoded Transport
Stream (Teletext Pid, MHEG Pid).
• Reflex – Displays the details of the statistical multiplexing setup of the selected
service.