Ericsson RX8000 - Vanc; Vbi

Using the Equipment
EN/LZT 790 0005 R7A
3-285
3.17.1.6.1 VBI
Figure 3.129 Decode > VBI-VANC > VBI
• VBI PID – Enables selection of the Vertical Blanking Interval Packet Identifier
from the service list via a drop-down menu. The first VBI PID in the PMT of the
selected service is selected automatically.
• User PID – Enables user to specify the VBI User PID that can be selected the
VBI PID list.
3.17.1.6.2 VANC
Figure 3.130 Decode > VBI-VANC > VANC
• VANC PID – Enables selection of Vertical Ancillary Data Packet Identifier from
the service list via a drop-down menu. The first VANC PID in the PMT of the
selected service is selected automatically.
• User PID – Enables user to specify the VANC User PID that can be selected the
VANC PID list.
• Stream Status – Displays the presence of Vertical Ancillary Data from the
incoming stream.
• Output Status – Displays the presence of Vertical Ancillary Data in the output
stream.
• Enable VANC – This menu allows the user to enable or disable data to be
extracted from the VANC PID.
Enable SD-VANC – This menu allows the user to enable or disable the insertion
of data in to the SD-SDI VANC space.