Ericsson RX8000 - Preset Save;Recall; Save;Load

Using the Equipment
EN/LZT 790 0005 R7A
3-55
Figure 3.32 Presets Web Page
Preset Save/Recall
• Select Preset Number – Enables the input of the number of the preset to be
selected. When a number is entered into this box, the tuning information and
service ID stored in that numbered preset will be loaded into the unit’s
configuration.
• Save Preset Number – Enables the input of the number of the preset to be
saved. When a number is entered into this box, the tuning information and
service ID stored currently selected will be stored as that number preset. The
name will change from NO STORED SERVICE to the name of the service.
• Preset 1/40 – Displays the name of the preset for the associated preset number.
When the preset number is not used, NO STORED SERVICE is displayed.
3.9.6 Save/Load
This page gives access to a range of Configuration download and Upload facilities
supported by the IRD.
To view this page, select the Save/Load tab from the top of the web page.