Ericsson RX8000 - Channel Configuration: 10-Stereo Pairs (MUS Only) Audio

Using the Equipment
3-274
EN/LZT 790 0005 R7A
3.15.7 Channel Configuration: 10-Stereo Pairs (MUS only) Audio
3.15.7.1 Availability
 = Option B = Supplied with Base Model
RX8200 RX8252 RX8305 RX8310 RX8310B RX8315 RX8320 RX8330 RX8330C
10-Stereo
Pairs (MUS
only) Audio

3.15.7.2 Order Items
Option Name Card Number FAZ Number Marketing Code
No option cards are required for this feature
3.15.7.3 Control
Web Front Panel SNMP Serial Remote
 
3.15.7.4 License Keys
Marketing Code Description FAZ Number License Key Name
RX8200/SWO/4AUD 4 x Audio Capacity (Enable
additional audio decoders)
FAZ 101 0113/20 RX8200/SWO/4AUD
3.15.7.5 Functional Description
This is where ten audio decoders are exposed, each providing two-channel output
(a stereo pair) but will only decode MPEG-1 Layer II.
Up to 16 audio channels can be encapsulated as Embedded Audio in the SDI output
signal, thus only the eight Advanced Audio Decoders can be routed to the SDI
Embedded output. In this mode, the Advanced Decoders are assigned to Audio
Decoders 1-8 and the Basic Decoders are assigned to Audio Decoders 9-10 so that
the first eight Audio Decoders are mapped to the SDI Embedded outputs by default.
Note: Previous to software version 7.1.3, the Basic Decoders were assigned to
Audio Decoders 5-6 and Advanced Decoders were assigned to Audio
Decoders 1-4 and 7-10.
It is possible to get up to 8 audio channels out of the physical audio output ports if
the extra audio output option card has been fitted. Any of the ten Audio Decoders
exposed can be routed to the audio output ports.