Ericsson RX8000 - RX8000 Audio Alignment Levels; Supported Audio Bit Rates; Supported Audio Specifications

Technical Specification
B-16
EN/LZT 790 0005 R7A
B.1.3.1 RX8000 Audio Alignment Levels
The audio Alignment Levels on the RX8000 are configured according to SMPTE
RP155. That is, with the audio Gain and analogue Clipping Level at their default
values, a digital audio source at -20 dBFS (SMPTE Alignment Level) decoded on
the RX8000 will produce an AES output level of 0 dB(VU) and an analogue output
level of +4 dBu.
Table B.13
Alignment Levels on RX8000 in its Default State (Satisfies SMPTE RP155)
Input
Digital dBFS
Gain dB
Clipping
Level dB
Output
AES dB(VU)
Output
Analogue dBu
-20 0 20 0 +4
-18 0 20 +2 +6
Where it is desired that the output levels of the RX8000 satisfy EBU Alignment
Levels then the Gain and/or Clipping Level can be adjusted to achieve this.
Table B.14 Alignment Levels on RX8000 Adjusted to Satisfy EBU R68-2000
Input
Digital dBFS
Gain dB
Clipping
Level dB
Output
AES dB(VU)
Output
Analogue dBu
-18 -6 20 -4 0
B.1.3.1 Supported Audio Specifications
Table B.15 Supported Audio Specifications
Specification Description
ISO/IEC 13818 Generic Coding of Moving Pictures and Associated Information:
(MPEG-2) Audio.
ATSC A-52 Digital Audio Compression Standard (Dolby Digital).
SMPTE302M Linear Audio
B.1.3.2 Supported Audio Bit Rates
Table B.16 Supported Audio Data Bit Rates (MPEG-2)
Mono kbps Stereo kbps
32 64
48 96
56 112
64 128
80 160