Ericsson RX8000 - Device Info - Trap Destination Table

Using the Equipment
EN/LZT 790 0005 R7A
3-39
Board Type Description
1918 IP Output (RX8200 only)
1919 IP Output (RX83xx only)
1920 MPEG 2 4:2:2 Decoder, 1
st
generation (RX8200 only)
1921 MPEG 2/4 AVC 4:2:2 Decoder, 2
nd
generation (RX8200 only)
1922 Common Interface Descrambler (RX8200 only)
1923 NDS Descrambler (RX8200 only)
1924 G.703 Input
1925 8VSB Terrestrial Input (RX8320 only)
1926 Russian SECAM Video Output (RX8330 only)
1927 Remote Data Card (RX8200 only)
1928 DVB S2 2
nd
Generation Input
1929 G.703 Input (RX8200 only)
1930 High Quality Down-converter (RX8200 only)
1931 DVB S2/IP Input (RX8200 only)
1932 DVB-T2 Input (RX8200 only)
1933 Multi Format 4:2:2 Decoder, 3
rd
generation (RX8200 only)
1934 Small Form Factor (SFF) Bi-directional IP Card
1935 DVB-S2X Input (RX8200 only)
1936 Enhanced Multi Format 4:2:2 Decoder, 4
th
generation (RX8200 only)
1940 Program Transcoder (RX8252 only)
3.9.2.5 Device Info > Trap Destination Table
When an alarm occurs within the equipment, an SNMP Trap message is sent to all
destinations and a list of these destinations is given in this web page.
To view this page, select the Trap Destination button from the Device Info page.
Figure 3.22 Device Info > Trap Destination Table Web Page