Using the Equipment
3.9 General Web Browser Pages
The web interface served by the RX8000 will be one of two modes: the Dashboard
View or the Advanced View.
All references to accessing the web interface throughout this manual are via the
Advanced View only unless specified.
3.9.1 Status
Provided that the network is correctly configured, the following status page should
be automatically loaded and displayed.
Figure 3.16 Status Web Page
This page provides a number of top-level status items:
• Name – Shows the configured device name for this product.
• IP Address #1 – The configured IP address #of control port 1 for the product.
• IP Address #2 – The configured IP address #of control port 2 for the product.
• Current Status – The current top level alarm status for the IRD. This reflects the
highest level alarm active in the unit.
• Current Time – The time taken from the input Transport Stream. If a Transport
Stream lock is not achieved, the current time will remain at its default value.
To Next Page
Loading...