Using the Equipment
3.10.6.8.10 Packet Length Control and Packet Length Size
This menu allows the user to control manual packet length and its size.
STATUS |MAN PACKET LENGTH CONTROL ENABLE
3.2.1.1 |PACKET LENGTH SIZE 204
Use the (Forward) and (Back) keys to move between manual packet length
and packet length size then use the (Up) (Down) keys to select the required
value from the available options, for manual packet length control:
• ENABLE
• DISABLE
For packet length size:
• 188
• 204
3.10.6.8.11 ATM Delta and Alpha
This menu allows the user to control Reed-Solomon and input de-randomiser.
STATUS |ATM DELTA 0
3.2.1.1 |ATM ALPHA 0
Use the (Forward) and (Back) keys to move between ATM delta and ATM
alpha then use the (Up) (Down) keys to select the required value from the
available options within the range 0 – 0xff.
3.10.6.8.12 ATM Descrambler and ATM header correction
This menu allows the user to control the ATM descrambler and ATM header
correction.
STATUS |ATM DESCRAMBLING ENABLE
3.2.1.1 |ATM HEADER CORRECTION ENABLE
Use the (Forward) and (Back) keys to move between ATM descrambing and
ATM header correction then use the (Up) (Down) keys to select the required
value from the available options.
• ENABLE
• DISABLE
To Next Page
Loading...