Using the Equipment
= Up
= Down
= Left (Back)
= Right (Forward)
3.3.5 Edit and Save Pushbuttons
The Edit and Save pushbuttons (or keys) are used to modify and store user settings
within the selected menu. The Edit pushbutton is illuminated when the current menu
contains an editable setting. The Save pushbutton is illuminated when a change has
been made that requires saving.
To edit a user setting within the selected menu:
1. Press the Edit key. A cursor appears (flashes) on the first line of the display.
5. If a numerical value is to be entered, use the (Back) and (Forward) keys to
move the cursor along the line and select each digit in turn, and use the (Up)
and (Down) keys to increment or decrement the digit.
6. If a non-numerical (mode or feature) menu item is to be selected, simply change
the selection using the (Up) and (Down) keys.
7. Press the Save key to save the new setting or press the Edit key to abandon
the operation and return to the original setting.
3.3.6 Menu Structure
The RX8000’s menu structure is divided into “section headings” for example:
System, Alarms, Input, etc. Each of these is accessible by scrolling up and down the
“root level” of the menu tree. The root level of the menu tree is accessed by
selecting the (Back) key until the menu can go no further. At this root level the
pages will be numbered 1, 2, 3, 4, etc.
Each of these section headings then has sub-menus which can be accessed by
scrolling (Forward) and (Down). The further into the sub-menus, the longer the
page number will get, e.g. 1, 1.1, 1.1.1, etc.
This structure is currently as follows:
To Next Page
Loading...