Using the Equipment
3.11.3.2 Order Items
Option Name Card Number FAZ Number Marketing Code
No hardware option required.
This option is not available if RX8200/BAS/BSKYB or RX8200/BAS/SKYIT are ordered
3.11.3.3 Control
Web
Front
Panel
SNMP
Serial
Remote
3.11.3.4 License Keys
Marketing Code Description FAZ Number License Key Name
Upgrade only required for
older RX8200
RX8200/UPS/BISS
License key for BISS
single service
FAZ 101 0113/86 RX8XXX/SWO/BISS
RX83XX/SWO/BISS/MSD License key for BISS
multi service mode
FAZ 101 0108/16
RX8XXX/SWO/BISS/MSD
RX8200/SWO/BISS/MSD
RX8200/UPS/BISS/MSD
License key for BISS
multi service mode
FAZ 101 0113/91
FAZ 101 0113/94
RX8XXX/SWO/BISS/MSD
3.11.3.5 Functional Description
BISS (as specified in EBU Tech 3292 May 2002) is standard on RX8330 and
RX8200, MSD BISS functionality may be ordered on these base units.
Older units may require an upgrade license key for single service BISS, if in doubt
please contact Ericsson Customer Support.
3.11.3.5.1 BISS Mode 1
BISS Mode 1 uses a fixed control word to encrypt the data in the Transport Stream
using the DVB Common Scrambling Algorithm.
With BISS mode 1 this control word or key, known as the “clear session word” or
CSW, is entered into the receiver using the front panel or web interface. If the same
CSW has been entered into a BISS compliant encoder, then unit will decrypt the
encrypted service(s).
The workflow for this operation is to generate a random 12 digit hexadecimal
number (any random number), enter this into the encoder and then communicate
through secure means this number to all decrypting receivers.
This method of encryption is recommended for short events such as sports
broadcasts.
To Next Page
Loading...
