Ericsson RX8000 - Analogue Audio Performance Specifications

Technical Specification
EN/LZT 790 0005 R7A
B-13
B.1.2.7 Analogue Audio
The RX8000 Integrated Receiver/Decoder supports level control of the audio
outputs. Independent control of each output of each stereo pair is provided via the
User Interface and remote interfaces.
Audio output connector type: 9 way female D-type
Output level: +20 dBm nominal clipping level. Selectable in range +12 to +24 dBm.
Output impedance: 50 Ω (nominal).
Table B.10 Analogue Audio Performance Specifications
Parameter Specification
Safety status SELV
Output connector Male 9 pin D-sub
Output format Balanced
Bit rates 32 kbps to 384 kbps
Sampling rates 48 kHz
Nominal output level
0 dBu +/- 0.1 dB in 20 kΩ
Output impedance: <20 kΩ
Clipping level 12 dBFS – 24 dBFS (step size 1 dB)
Frequency response 48 kHz +/- 0.65 dB (< 25 Hz)
+/- 0.5 dB (25 Hz – 16 kHz)
+/- 0.65 dB (16 kHz – 20 kHz)
THD+N at 8dB
100 Hz
1 kHz
<-70 dB
<-70 dB
Cross-talk @ 0dB
100 Hz
1 kHz
6.3 kHz
10 kHz
<-70 dB
<-70 dB
<-70 dB
<-70 dB
Noise unweighted <66 dB
Noise A-weighted <62 dB
Linearity @ 1 kHz
+10 dB
-10 dB
- 20 dB
-30 dB
-40 dB
+/- 0.2 dB
+/- 0.2 dB
+/- 0.2 dB
+/- 0.2 dB
+/- 0.3 dB