Ericsson RX8000 - Emergency Home Carrier; Ras

Using the Equipment
EN/LZT 790 0005 R7A
3-159
3.11.4.7.11 Emergency Home Carrier
This menu allows the user to view the tuning parameters and assigned Service ID
configured as the Emergency Home Carrier. When the receiver detects signal loss,
the Emergency Home Carrier settings will be applied if the Over Air Control mode
was set to Enabled. This will override any tuning parameters and service selection
that the unit was tuned to prior to the loss of signal. This carrier can only be
configured by Director head-end using Director Over Air Commands. By default the
carrier settings are cleared and therefore not used.
DIRV5 |EMERGENCY HOME CARRIER
5.2.9 |TEST SERVICE 2
3.11.5 RAS
3.11.5.1 Availability
 = Option B = Supplied with Base Model
RX8200 RX8252 RX8305 RX8310 RX8310B RX8315 RX8320 RX8330 RX8330C
       
3.11.5.2 Order Items
Option Name Card Number FAZ Number Marketing Code
No hardware option required.
This option is not available if RX8200/BAS/BSKYB or RX8200/BAS/SKYIT are ordered
3.11.5.3 Control
Web Front Panel SNMP Serial Remote
   
3.11.5.4 License Keys
Marketing Code Description FAZ Number License Key Name
RX83XX/SWO/RAS License key to enable RAS CA on
RX83XX
101 0108/31 RX8XXX/SWO/RAS
RX8200/SWO/RAS License key to enable RAS CA on
RX8200
101 0113/52 RX8XXX/SWO/RAS
RX82000/UPS/RAS License key to enable RAS CA on
RX8200
101 0113/87 RX8XXX/SWO/RAS