EasyManua.ls Logo

Ericsson RX8000 - Vanc - Multi; VANC - SDP (OP-47 Teletext Subtitles)

Ericsson RX8000
500 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the Equipment
3-286
EN/LZT 790 0005 R7A
3.17.1.6.3 VANC > SDP (OP-47 Teletext Subtitles)
The RX8200 can extract Subtitling Distribution Packets (SDP) from VANC PES and
insert these packets in to the VANC space of the HD-SDI output. SDP is known as
OP-47 Closed Caption/Subtitling data in the Vertical Ancillary space as per the Free
TV Australia Operational Practice OP-47 Specifications.
These packets are also known as VANC WST (World System Teletext) packets and
have DID = 0x43 and SDID = 0x02.
The RX8200 is capable of parsing Teletext PES packets that carry EBU Teletext
Subtitle data and convert in to SDP for insertion.
Figure 3.131 Decode > VBI-VANC > VANC > SDP
Stream Status Displays the presence of Subtitling Distribution packets (SDP)
in the incoming Teletext PES stream or VANC PES stream.
Output Status Displays the presence of SDP (OP47 Closed Captions/
Subtitling data) being output to the VANC space.
SDP Insertion This menu enables or disables the insertion of the SDP into the
VANC space of the HD-SDI output.
SDP Insertion Line Allows the user to select AS INPUT, or a specific Line
Number in the range 9 to 20. Where SDP is converted from Teletext data, this
field specifies the Line Number it should be inserted to on the output.
- AS INPUT – Uses the same Line Number specified from the source data.
- 9 to 20 Overrides the source Line Number and outputs to the Line Number
specified here.
SDP Insertion FieldAllows the user to select AS INPUT or a specific Video
Field. This control allows the user to manage how SDP data is inserted into the
HD-SDI VANC. It is useful when cross converting an interlaced source into a
progressive output, e.g. 1080i > 720p.
- AS INPUT Uses the field as determined by the source data
- FIELD 0 forces SDP insertion into video field 0
- FIELD 1forces SDP insertion into video field 1
3.17.1.6.4 VANC > MULTI
The VANC Multi packet is for the carriage of a combination of subtitling packets and
other ancillary data such as WSS data packets. VANC Multi packets have a DID
value of 0x43 and a SDID value of 0x03. SDP may be carried as an inner packet
within the VANC Multi packet.

Table of Contents

Related product manuals