Ericsson RX8000 - FEC Enable; MDI Delay Factor (Max Value); Network Util 1 (Max Value); SNMP Enable

Using the Equipment
EN/LZT 790 0005 R7A
3-95
SETUP |DE-JITTER BUFFER LEVEL
3.2.4.1 |00500
Use the  (Up),  (Down),  (Forward) and  (Back) keys to enter the level.
3.10.5.13.33 SNMP Enable
This menu allows the enabling of SNMP. To access this menu from the above
menu, press the  (Down) key.
SETUP |SNMP ENABLE
3.2.4.2 |Disable
Use the  (Up) and  (Down) keys to toggle between the Enable and Disable
options.
3.10.5.13.34 FEC Enable
This menu allows the enabling of Forward Error Correction (FEC). To access this
menu from the above menu, press the  (Down) key.
SETUP |FEC ENABLE
3.2.4.3 |Disable
Use the  (Up) and  (Down) keys to toggle between the Enable and Disable
options.
3.10.5.13.35 Network Util 1 (Max Value)
This menu allows the viewing the maximum percentage network utilization for
Network 1. To access this menu from the above menu, press the  (Down) key.
SETUP |NETWORK UTIL 1 (MAX VALUE)
3.2.4.4 |100
3.10.5.13.36 MDI Delay Factor (Max Value)
This menu allows the viewing of the maximum MDI Delay Factor. To access this
menu from the above menu, press the  (Down) key.
SETUP |MDI DELAY FACTOR (MAX VALUE)
3.2.4.6 |50.000