Ericsson RX8000 - Connector (RX8200 Only); DVB-T2 (OFDM) Connector (RX8200 Only); G.703 Connector; IP in Connector (RX8200 Only)

Installing the Equipment
2-6
EN/LZT 790 0005 R7A
2.3.3 IP IN Connector (RX8200 only)
Units can provide two input Ethernet data interfaces.
Table 2.2 IP IN Connector
Item Specification
Connector type RJ-45 (100BaseT)
Connector designation IP IN 1
IP IN 2
Pin-outs Pin 1 – Tx Out (+)
Pin 2 – Tx Out (-)
Pin 3 – Rx In (+)
Pin 4 – CMT
Pin 5 – CMT
Pin 6 – Rx In (-)
Pin 7 – CMT
Pin 8 – CMT
2.3.4 G.703 Connector (RX8200 only)
The unit provides a single G.703 input connector.
Table 2.3 G.703 Connector
Item Specification
Connector type BNC 75 Ω female socket
Connector designation G.703 E3/DS-3
Pin-outs Centre
Shield
Input
Ground/Chassis
2.3.5 DVB-T2 (OFDM) Connector (RX8200 only)
The unit provides a single DVB-T2 input connector.
Table 2.4 T2 Connector
Item Specification
Connector type F-Type 75 Ω female socket
Connector designation DVB-T/T2
Pin-outs Centre
Shield
Input
Ground/Chassis
IP IN
G.703 IN
T2 IN