Ericsson RX8000 - Bit Rate; Frame Rate; Resolution

Using the Equipment
EN/LZT 790 0005 R7A
3-197
3.13.1.2.4 Frame Rate
This menu allows the user to view the current input frame rate detected by the video
decoder. This will be the same as the output frame rate because the unit does not
support frame-rate conversion.
VIDEO |FRAME RATE
8.4.3 |0HZ
This can be any of the following values:
• 0 (no video detected)
• 23.976
• 24
• 25
• 29.97…
• 30
• 50
• 59.94…
• 60
3.13.1.2.5 Resolution
This menu allows the user to view the current input resolution detected by the video
decoder, this may not be the same as the output resolution depending upon up-
conversion and down-conversion settings.
VIDEO |RESOLUTION
8.4.5 |0X0
This is read and displayed directly from the information of the incoming video
sequence header information, notably the horizontal_size and vertical_size fields. A
size of 0x0 means no video has been detected.
3.13.1.2.6 Bit Rate
This menu allows the user to view the current video bit rate detected by the demux
process for the currently selected video stream.
VIDEO |BIT RATE
8.4.6 |0.000 MBPS