Ericsson RX8000 - Biss; CI Forced Voltage 3 V3; CI Module Name; CI Module Status

Using the Equipment
3-146
EN/LZT 790 0005 R7A
• MAX PIDS – In this case, the RX8000 has found more components that are
scrambled than are allowed by the configuration of the unit (Maximum CAM
Components). This may not be a problem but does mean that some of the
components scrambled within the service cannot be de-scrambled because of
limitations of the CAM.
3.11.2.9 Front Panel Setup
3.11.2.9.1 CI Module Status
This menu displays the presence of the CI Module (CAM), this will show either
PRESENT or NOT PRESENT, when diagnosing CI issues please check this menu
first, if the CAM has a fault it may not be detected by the unit.
CI |CI MODULE STATUS
5.4.1 |PRESENT
3.11.2.9.2 CI Module Name
This menu displays the name of the CI module (CAM). This is a text string supplied
by the CA vendor and can be any value.
CI |CI MODULE NAME
5.4.2 |VIACCESS
3.11.2.9.3 CI Forced Voltage 3V3
This menu allows the user to override the 3V3 / 5V sense for the CAM. Some CAMs
may be incapable of working correctly with 5V despite being advertised supporting
5V. This control forces the unit to supply only 3.3V to the CAM.
CI |CI VOLTAGE FORCED 3V3
5.4.3 |FALSE
3.11.3 BISS
3.11.3.1 Availability
 = Option B = Supplied with Base Model
RX8200 RX8252 RX8305 RX8310 RX8310B RX8315 RX8320 RX8330 RX8330C
BISS B B B B
BISS/MSD
  