Ericsson RX8000 - Audio Decoder - PID; Channel Configuration Status; Decode - Audio Decoders - Audio

Using the Equipment
3-242
EN/LZT 790 0005 R7A
Channel Configuration allows the user to change how the Audio Decoders behave
and the following modes are available:
• Stereo Pairs
• Multi-Channel (5.1)
• Dual Multi-Channel (5.1)
• Phase Aligned Audio (PAA)
• Paired Audio Decoder Mode
• 10-stereo Pairs (MUS only) Audio
• 8 Channel AES3
• 16 Channel Aligned (MUS only) Audio
The Channel Configuration mode is selected manually except for the Phase Aligned
Audio mode, which is selected automatically by the RX8000. A detailed description
for each mode is provided in a later section.
3.14.4.1.2 Channel Configuration Status
Channel Configuration Status indicates the mode currently set and accepted by the
RX8000. This is particularly useful in the case where the Phase Aligned Audio mode
is automatically selected.
3.14.4.2 Decode > Audio Decoders > Audio
Figure 3.112 Decode > Audio Decoders > Audio Window
Depending on the RX8000 variant and the Channel Configuration mode selected, a
number of Audio Decoder sections will be presented that allows PID selection and
status feedback.
3.14.4.2.1 Audio Decoder > PID