Using the Equipment
Marketing Code Description FAZ Number License Key Name
RX8200/SWO/DVBS2/V
CM
Enables DVB-S2 multi-
Transport Stream mode on
RX8200 IRDs
Requires 2nd Generation
DVB-S2 Capable Satellite
Demodulator, Combined
DVB-S2 Capable Satellite
and IP Input or DVB-S2X
cards
FAZ 101 0113/56 RX8XXX/SWO/DVBS2/V
CM
RX8200/SWO/IP/PROM
PEG
Enables SMPTE 2022,
ProMPEG FEC on IP inputs
Requires Combined DVB-S2
Capable Satellite and IP
Input
FAZ 101 0113/37
RX83XX/SWO/DVBS2/
QPSK
Enables DVB-S2 QPSK
functionality on RX8300 IRDs
FAZ 101 0118/6 RX8XXX/SWO/DVBS2/Q
PSK
RX83XX/SWO/DVBS2/8
PSK
Enables DVB-S2 QPSK and
8PSK functionality on
RX8300 IRDs
FAZ 101 0118/4 RX8XXX/SWO/DVBS2/8P
SK
RX83XX/SWO/DVBS2/L
SYM
Enables low symbol rate
operation for DVB-S2 modes
on RX8300 IRDs
FAZ 101 0118/5 RX8XXX/SWO/DVBS2/LS
YM
Cautions!
The IRD provides DC power via the active L-Band input connector to drive an LNB
(Low-Noise Block Down-Converter). Do not connect equipment other than an LNB
to this connector. Failure to do this may result in damage to the external equipment.
The F-type Connector is not suitable for repeated connection and disconnection.
When intended for use in this way, fit a sacrificial connector and connect to it.
3.10.4.5 Functional Description
The satellite input options available for the RX8000 IRD are capable of DVB-S
(EN300-421) and the DVB-S2 (EN302-307-1) standard. DVB-S2 extensions or DVB-
S2X (EN302-307-2) is now an input option for the RX8200 IRD.
DVB-S2 offers up to a 30% increase in data rate carriage for an equivalent link
margin compared to what the older DVB-S standard can offer. This functionality is
often partnered with MPEG-4 compression to give bandwidth efficient distribution of
high definition services.
To Next Page
Loading...