Using the Equipment
3.19.4.6.6 Valid Attributes Configurations
Table 3.55 Valid Attributes Configurations
Short type Long type Type definition
V Video VIDEO
A Audio AUDIO
LSD Data LSD DATA
HSD Data HSD DATA
VBI VBI VBI
VANC VANC VANC
DVBsub DVB subtitles DVB SUBTITLES
Ttxt Teletext TELETEXT
Spl Splice SPLICE
MPE MPE MPE
? Unknown UNRECOGNISED
??? ??? INVALID
3.19.4.6.7 Filtering Components by Language
Audio components can be filtered by language. This is achieved by typing
“L:xxx,L:zzz” in the Attributes cfg field.
Where xxx and zzz is specified, this is three character language field defined in the
ISO 639-3 standard. These values do not need to be the same. The first one is for
the first language of the audio component and the second one refers to the
language for the second audio component. It is possible to specify just one
language by typing only “L:xxx”.
An unidentified language will be shown as “???”.
DVB Subtitle components can be filtered by language. This is achieved by typing
“L:xxx” in the Attributes cfg field.
If you do not want to specify any attribute, either remove the content of the field
(leaving it empty) or specify ??? in place of xxx.
3.19.4.6.8 Matching Weights
An available component will be evaluated to find the best match between all the
stored configurations for its matching type. Between all those configurations, it will
compare the input PID.
To Next Page
Loading...