Chapter 3
This is the last of the Alarm screens. To return to the top level Alarm screen, press
the W (Back) key.
3.5.3.2.9 2.2.9 Version
To view the Unit Software Version, press the T (Down) key. The following screen is
displayed:
VERSION |SOFTWARE VERSION
2.2.9 |0.13 >
3.5.3.2.9.1 2.2.9.1 Firmware SW Version
To view the Firmware SW Version, press the X (Forward) key. The following screen
is displayed:
VERSION |FIRMWARE SW VERSION
2.2.9.1 |0.77
3.5.3.2.9.2 2.2.9.2 CPLD SW Version
To view the CPLD SW Version, press the T (Down) key. The following screen is
displayed:
VERSION |CPLD SW VERSION
2.2.9.2 |1.2
3.5.4 2 Input (8VSB Input Card RX8320/HWO/8VSB)
The Input menu is used to select the various inputs to the equipment and set input
parameters. To access the Input menu from the System menu, press the T (Down)
key. The following screen is displayed:
INPUT |UNLOCKED INPUT: ASI
2 |--- Mbits/s --- >
3.5.4.1 2.1 Select/Primary Input
To access this function, press the X (Forward) key. The following screen is
displayed:
INPUT |SELECT INPUT ASI
2.1 |PRIMARY INPUT ASI
The X (Forward) and W (Back) keys are used to choose the Select and Primary
input types.
EN/LZT 790 0005 R1A
3-38
To Next Page
Loading...
