Ericsson RX8000 Series - Page 91

Chapter 3
SETUP |MODE MPEG
2.2.2.1 |
To choose the Mode:
1. Press the Edit key. The cursor appears below the displayed type (MPEG shown
above).
2. Use the S (Up) and T (Down) keys to toggle between the available types:
MPEG and ATM (dependent on model and option licences obtained).
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.5.2.2.2 2.2.2.2 Destuffing/Deinterleaver
To access the Destuffing/Deinterleaver Setup function, press the T (Down) key.
The following screen is displayed:
SETUP |DESTUFFING TRUE
2.2.2.2 |DEINTERLEAVER TRUE
To select the Destuffing/ Deinterleaver values:
1. Press the Edit key. The cursor appears below the displayed type (TRUE shown
above).
2. Use the S (Up) and T (Down) keys to toggle between the available options:
TRUE and FALSE (dependent on model and option licences obtained).
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
4. Use the X (Forward) and W (Back) keys to toggle between the Destuffing and
Deinterleaver inputs.
3.5.5.2.2.3 2.2.2.3 Reed-Solomon/Derandomizer
To access the Reed-Solomon/Derandomizer Setup function, press the T (Down)
key. The following screen is displayed:
SETUP |REED-SOLOMON TRUE
2.2.2.3 |DEDERANDOMIZER TRUE
To select the Reed-Solomon/Derandomizer values:
1. Press the Edit key. The cursor appears below the displayed type (TRUE shown
above).
2. Use the S (Up) and T (Down) keys to toggle between the available options:
TRUE and FALSE (dependent on model and option licences obtained).
EN/LZT 790 0005 R1A
3-43